1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-5860G
  6. Instrucciones de instalación

Metra 95-5860G Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Speed clips (4) • D) Panel clips (4) • E) #10 x 3/4" Phillips screws (4)
A
Metra. The World's Best Kits.
®
Ford E-Series Cutaway
Visit
specific applications
KIT FEATURES
• Textured trim panel designed to cover minor dash modifications.
• DDIN brackets provide stable mounting points
• Painted gray
B
C
MetraOnline.com
2021
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
D
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Visit metraonline.com for audio and steering
wheel interface options.
Antenna adapter: 40-EU10
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench • Cutting tool
E
Attention!
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
95-5860G
With the key out of the ignition,
REV. 1/5/22 INST95-5860G
Tabla de contenido
loading

Manuales relacionados para Metra 95-5860G

Resumen de contenidos para Metra 95-5860G

  • Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/5/22 INST95-5860G...

  • Página 2: Dash Disassembly

    DASH DISASSEMBLY KIT PREPARATION 1. Remove the radio using the Metra 1. Place the (4) speed clips into the sub 86-9001 radio removal tools. If you do dash. (Figure A) not have removal tools, the factory dash 2. Attach the (4) supplied panel clips to the panel can be removed with the radio radio trim panel.

  • Página 3: Kit Assembly

    5. Re-assemble the factory dash panel the radio. Metra recommends using the then snap the radio trim panel over the proper mating adapter from Metra and/ radio to complete the install.
  • Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/5/22 INST95-5860G...
  • Página 5 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/5/22 INST95-5860G...

  • Página 6: Desmontaje Del Tablero

    PREPARACIÓN DEL KIT 1. Quite el radio con las herramientas 1. Ponga los (4) ganchos de velocidad en el de retiro de radios Metra 86-9001. subtablero. (Figura A) Si no cuenta con las herramientas 2. Fije los (4) ganchos de panel incluidos de retiro, puede retirar el panel del con el panel de moldura para radio.

  • Página 7: Ensamble Del Kit

    5. Vuelva a ensamblar el panel de tablero de fábrica. Después, ponga el panel de adecuados de Metra o de AXXESS. Vuelva moldura para radio a presión encima a conectar la terminal negativa de la batería y haga pruebas en el radio para...
  • Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/5/22 INST95-5860G...

Tabla de contenido