Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. Place the body (3) on a permanent flat, level, heat resistant, non flammable
surface away from flammable items.
2. Place the firebowl (2) on the two bars attached to the base.
3. Place the flue (1) on the body (3).
USE
Lighting
•
Ensure the firepit is positioned on a permanent flat, level, heat resistant,
non-flammable surface away from flammable items.
•
Make sure there is a small amount of ash in the firebowl bottom.
•
Place paper or dry kindling on ash in the centre of the firebowl bottom.
•
Place fuel on the paper or dry kindling.
•
Light the paper or dry kindling to start a fire.
Tending the fire
•
Add fuel to the firepit to increase the heat slowly when embers glow. Do
not overload with fuel, only tow or three small logs is sufficient.
•
When shifting logs, use a safety tool to allow for additional airflow.
Extinguishing
•
To extinguish the firepit, stop adding fuel and allow fire to die or douse
with sand. Do not use water as this may damage the firepit.
EN
13
Tabla de contenido
