Team kalorik TKG SFC 2000 Manual De Instrucciones página 9

8. The small and large brushes, the scrubbing brush and the curved nozzle can be
assembled onto the straight nozzle.
9. Window wiper: before a direct use on the windows, preheat the glass by spraying
steam in a wider arc from a distance of 20-25cm. Slowly reduce the distance to 10-
15cm to preheat the glass further.
The window wiper must be attached to the scrubbing brush. First assemble the
scrubbing brush onto the straight nozzle. Take off the cloth from the scrubbing brush
and connect the window wiper to the brush by the two hinges. The window wiper can
be dismantled easily by unhooking the hinges again.
Window wiper
Warnings:
• Do not plug in the appliance until you have attached an accessory.
• Wait until the housing and the accessories have cooled down before touching the
appliance.
USE
1. Attach the appliance to the mains supply and press the on-off switch. The green and
red control lamps light up. As soon as the preheating (about 10 minutes) is done, the
red heating control lamp goes out. The appliance is now ready for use.
It is normal that the red control lamp switches on and off during the process, since
the thermostat controls the heating element automatically.
2. The appliance is equipped with a child safety device. To release the locking device,
push the triangular pin on the right-hand side of the steam gun towards the left.
3. Press the steam button and move the appliance slowly over the surface which is to be
cleaned. It is recommended that the distance between the nozzle and the surface
amounts to at least 2-3cm.
Scrubbing brush
Hooks
9
Hinges
TKG MBO 1000