Guide PC210 Guia De Inicio Rapido página 20

CN GB FR RU SA ES
3. Enter the disk folder of the computer, select the image to be
exported, copy it to the computer, and view the image files
through the analysis software.
4. After copy is completed, disconnect the USB cable from the
computer.
【Image mode】
In the observation mode, select the image mode through
of the remote control. The device supports four image
modes, namely infrared mode, visible light mode, MIF mode and
PIP mode.
【Temperature measurement parameters】
Temperature measurement parameters will affect the accuracy
of temperature measurement results. They need to be set in
advance before temperature measurement.
1. Temperature measurement range: select the appropriate
temperature measurement range according to the
temperature of the measured target
2. Emissivity: Adjust according to the emissivity of the measured
target. There are commonly used physical emissivities in this
device, which can also be customized.
3. Reflection temperature: the effect of the current ambient
temperature on the target temperature.
4. Target distance: adjust the distance parameters of the device
according to the distance of the measured target to make the
temperature measurement more accurate.
【High and low temperature alarm】
1. Short press
2. Select Alarm.
to enter the menu interface.
18