Power Output; Ventilation Openings - LD Systems MAILA SUB Manual De Usuario

POWER INPUT
1
PowerCON TRUE1 power input jack. A suitable power cord is included in the scope of delivery
POWER
2
On-off switch. Always turn the speaker on as the last device in the signal chain and turn it off as the
first device.

POWER OUTPUT

3
The PowerCON TRUE1 mains output socket is used to supply power to other system components. Make
sure that the total power consumption of all connected devices does not exceed the value specified in
amperes (A) on the device!
INPUT
4
Balanced line input with locking, female 3-pin XLR socket.
THRU
5
Balanced line output for forwarding the line input signal (male 3-pin XLR socket).
LC-DISPLAY
6
Multifunctional graphic LC display with lighting.
PUSH TO ENTER / HOLD TO MUTE
7
Rotary push encoder for navigating the main menu and submenus and adjusting system settings.
Select the individual menu items in the main menu and in the submenus by turning the encoder and
confirm the selection by pressing the encoder. Change a numerical value or status in a menu item by
turning the encoder and confirm the change by pressing the encoder. To go one level higher in the
menu structure, select the arrow symbol < and confirm the selection.
Press the encoder for about 2 seconds to mute the subwoofer and again for about 2 seconds to unmute it.
LEDS TO INDICATE DEVICE STATUS
8
PWR - (Power) The white indicator LED lights up when the device is correctly connected to the mains
and switched on.
SIG - (signal) The white indicator LED lights up when an audio signal is present at the device.
LIMIT - (limiter) The yellow indicator LED lights up when the loudspeaker system is operated in the
upper limit range. A brief flashing of the LED is not critical. To protect the system, an excessive
signal level is gently reduced by the integrated limiter. If the limiter LED lights up longer or stays on,
reduce the volume level.
PROT - (Protect) The red indicator LED lights up if the subwoofer is overloaded or overheated. The
subwoofer is automatically muted. After reaching normal operating conditions, the device switches
back to normal operating mode after a few minutes.

VENTILATION OPENINGS

9
To avoid damage to the device, do not cover the ventilation openings on the back and ensure that air
can circulate freely.
10