Digital Display - Tristar AC-5552 Manual De Usuario

6. SWING Press to adjust the vertical direction
of the air flow.
7. SPEED Press to switch the fan speed to
HIGH, MEDIUM or LOW.
8. LED INDICATORS Displays the selected fan speed.
9. TIMER Press to set the timer for the unit to
automatically START and STOP.
10. UP Press to increase the temperature
or timer settings (16°C - 32°C)
11.

DIGITAL DISPLAY

Displays timer and temperature
settings.
USE
Startup and shut down
• Press the POWER button to turn the unit on. The unit will run in
FAN mode as default.
• Press the MODE button to select the desired operation.
• Press POWER again to turn off the power.
Operating Modes
The unit has 5 operating Modes - COOL, HEAT, FAN, DRY, and
SLEEP.
COOL
• Press the MODE button repeatedly until the COOL operation
LED lights up.
• Use the UP and DOWN buttons to adjust the displayed
temperature to your desired temperature. The temperature can
be set between 16°C and 32°C.
• Set the fan speed by pressing the SPEED button repeatedly until
the desired speed is selected.
• Press the SWING button to spread the direction of the air
horizontally.
The air conditioner will automatically stop if the room temperature is
lower than the selected temperature.
HEAT
• Press the MODE button repeatedly until the HEAT operation LED
lights up.
• Use the UP and DOWN buttons to adjust the displayed
temperature higher than the room temperature.
• Set the fan speed by pressing the SPEED button repeatedly until
the desired speed is selected.
• For continuous operating the drainage hose should be attached
to the unit.
FAN
In FAN mode the air in the room is circulated and not cooled.
• Press the MODE button repeatedly until the FAN operation LED
lights up.
• Set the fan speed by pressing the SPEED button repeatedly until
the desired speed is selected.
DRY
• Connect the drainage hose to the drainage outlet at the bottom of
the unit.
• Press the MODE button repeatedly until the DRY operation LED
lights up. The fan speed switches over to low and both the fan
speed and the temperature cannot be adjusted.
SLEEP
Instruction manual
EN
9