Insignia NS-RMT5D21 Guia Del Usuario página 10

5 Release the button as soon as your device turns off.
The LED blinks twice and your remote will now
operate your device.
Note: If one or more buttons do not work as expected,
start again at step 2. Your remote will start with the
next code in memory.
Setup method 2 - device codes
If your device brand is not listed in the SimpleSet
tables, you can set up your device by using device
codes.
1 Turn on your device and point your Insignia
universal remote control at it.
2 Press the device button you wish to set up (for
example - TV).
3 Press and hold the SETUP button until the LED on
your remote button blinks twice.
4 Enter the first four-number code listed for your
brand (for example, 1840 for LG). The LED blinks
twice when the last number of the code is entered.
5 Point your remote towards your device and press
the
remote is ready to use. If not, repeat steps 2-5 with
the next code in the list.
Note: If your original remote did not have a Power
button, try testing with a different button at step 5. For
example, try pressing Play or Pause when setting up
your streaming device, then see if the device responds.
Setup method 3 - function learning
Your Insignia universal remote control can learn any
function from any other working remote control. This
is a one-time setup that lets you control any infrared
controlled device you have. It also lets you add a
button function that may be missing to a spare button
on your Insignia universal remote control.
To do this, make sure that you have all of your original
remote controls handy, and that they have fresh
batteries.
10
(power) button. If the device turns off, your
www.insigniaproducts.com