Skil LL9000 Manual Del Propietário

To reduce the risk of injury, the user must read and understand
WARNING
the Operator's Manual before using this product. Save these
instructions for future reference.
1/4'' Screw
Handle
Platform
Center
Column
Locking
Knob 1
Adjustable Foot
Owner's Manual Using With the Tripod
NOTE: The tripod provides a stable, height-adjustable support (up to 43 inches). It
may be utilized on a compact hand-held tool that includes a ¼'' -20 UNC threaded
mounting hole that will not cause the assembly tip tip-over after mounting.
Thread the ¼" -20 UNC tripod screw into the ¼" -20 UNC threaded mounting hole
•
on your tool. Secure your tool with the 1/4'' screw platform on the tripod.
Loosen locking knob 1. Rotate the crank until the desired height is attained.
•
Model: LL9000
Tighten locking knob 1 to lock the center column in position (FIG. 1).
Tripod
Fig. 1
Locking
Knob 3
Mounting
Plate
Loosen locking knob 2. Adjust the
•
mounting plate to the desired position;
the maximum adjustment scale is 90°.
¼'' -20UNC
After adjustment, tighten locking knob
Screw
2 to lock the mounting plate in position
(FIG. 2).
Locking
Knob 2
Crank
Loosen locking knob 3 to pan the head left or right. The maximum adjustment
•
scale is 360°. After adjustment, tighten locking knob 3 to lock the position
(FIG. 3).
Fig. 3
Flip Lever
Manually raise the column to the
height desired.
Fig. 2
90
o
360
o
L o o s e n t h e h a n d l e b y t w i s t i n g i t
Fig. 4
•
counterclockwise. The mounting plate
can be tilted by moving the handle up or
down; the maximum adjustment scale
is 360°. After adjustment, tighten the
handle clockwise to lock the position
(FIG. 4).
Open the 3 flip levers on one leg to Fig. 5
•
release that leg for adjustment. Extend
the leg to the proper height. Close the
levers to lock the leg in position. Repeat
for the other two legs (FIG. 5).
360
o