Ferm GTM1005 Traducción Del Manual Original página 8

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 64
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects that can make a connection from
one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
NOTE The temperature „130 °C" can be replaced
by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
ADDITIONAL SAFETY INSTRUCTION
CORDLESS GRASS TRIMMER:
• Never allow children or people unfamiliar
with these instructions to use the trimmer.
Local regulations may restrict the age of the
operator. When not in use, store the trimmer
8
out of reach of children.
• Never operate the trimmer with missing or
broken guards or shields or without guards or
shields in position.
• Before using the machine and after impact,
check for signs of wear or damage and repair if
necessary
• Never operate the product when you are tired,
ill or under the influence of alcohol, drugs or
medicine.
• Always wear long heavy trousers, boots and
gloves. Do not wear loose clothing, jewellery,
short trousers, sandals and never work
barefoot.
• Wear safety eye protection and ear defenders
when operating the machine
• Keep firm footing and balance. Do not
overreach.
• Never work with this trimmer while people,
especially children or pets are nearby
• Wait until the spool line has completely
stopped before touching it. The spool line
continues to rotate after the trimmer is
switched off; a rotating wire can cause injury.
• Work only in daylight or in good artificial light
• Avoid operating the trimmer in bad weather
conditions especially when there is a risk of
lightning.
• Operating the trimmer in wet grass decreases
the efficiency of performance.
• Switch off when transporting the trimmer to
and from the area to be worked on.
• Switch on the motor only when the hands and
feet are away from the cutting means.
• Do not put hands or feet near the cutting
system.
• Remove battery before spool change
• Never fit metal cutting elements to this
trimmer.
• Inspect and maintain the trimmer regularly.
• Have the trimmer repaired only by an
authorized customer service agent.
• Always ensure that the ventilation slots are
kept clear of debris
• Remove the battery:
• whenever you leave the machine
unattended for any period of time
• before replacing the wire
• before cleaning or working on the trimmer
• Store the machine in a secure, dry place out
of the reach of children. Do not place other
Tabla de contenido
loading

Tabla de contenido