hillvert HT-IRI-07 Manual De Instrucciones página 25

Dial position
„RUN"
„SET CLOCK"
„START TIME"
„HOW LONG"
„HOW OFTEN"
„OFF"
+/- button (to increase/decrease the parameter value)
•
Pressing the appropriate button increases or decreases the value for a given
parameter. Holding the button pressed down causes a faster parameter value
change.
Time delay activation button before starting
•
When the dial is in the "RUN" position, pressing the time delay activation button
will postpone the start of the automatic operation schedule of the device by 0-24-
48-72 hours (depending on the number of times button is pressed).
• Activation/deactivation of manual watering control
With the function knob in the RUN position, press the manual control button to
turn on continuous watering for 0-240 minutes, regardless of the programmed
operating mode.
Device RESET
•
Pressing Reset will restore the device factory settings.
3.3.2 Programming automatic control
Clock setting
•
Set the timer function selector to the SET CLOCK position, and use the value
increase/decrease buttons to set the correct time. Confirm the settings with the
OK button.
Description of the function
Settings saved, timer active - the device works according to
the saved schedule
Clock time setting
Set Watering Start Times (00:00 - 23:59)
Set Watering Duration (1-240 minutes)
Watering frequency setting (4, 6, or 12h, 1-15 days)
Timer inactive, device off