Basic Operation; Power On/Power Off - aqprox appLAB3 Guia Del Usuario

LED indicators:
LED Indicators
Color Status
BLUE ON
Green ON
RED ON
YELLOW ON
PINK ON
BLUE FLASH
RED FLASH
WHITE ON

3.6 Basic Operation

3.6.1 Power On/Power Off

Press "-" at the rear turn on the power switch, the printer is on and LED
indicator is blue.
Press "O" at the rear turn off the power switch, the printer is off and LED
indicator is off.
3.6.2 Feed
When the printer is on, press feed button, printer will automatically feed paper to the
specified position according to the paper type you use. Press feed button, printer will
feed a fixed distance paper under "Continuous Mode"; printer will feed a whole label
under "Label Mode".
3.6.3 Print Self-test Page
The self-test checks whether the printer has any problems.
The method of self-test:
Print Self-test Page Manually
1.Make sure paper is loading properly.
2.Make sure the printer is off and top cover closes properly.
3.Press the FEED button and turns the printer on simultaneously, the printer prints
self-test page.
Printing Windows Driver Program
1. Install the Windows driver. Refer to the Windows Driver Installation for the
installation procedure.
2.Please set the "Interface" as the type you use.
3. Print the test page using the "Print test page" function of Windows driver.
18
The printer is ready to print with label media
The paper is feeding/under printing
The printer cover button is not in right position
The printer is ready to print with continuous media
The thermal printer head is overheated
Do not pass the RAM test
Out of paper
The printer is ready to print with black mark media
Remarks