FREEWIRE FW500 Manual De Instrucciones página 32

Selecting Call Tone
- Press " " key four times, LCD display shows the icon and call tone number will flash,
- Press " " or "
- Press the "PTT" Key to confirm and quit.
Scrambler Function
You can enjoy privacy to talk within your group by selecting the same scrambler setting as
your group member does. There are 4 different scrambler settings available)
Press " " Key 5 times, LCD display icon. Press " " or "
setting from 1 to 4, OF means normal function = scrambler off.
Press PTT to confirm and quit. After turning on scrambler function, LCD will display icon.
Please make sure that all other group members of Your PMR network PMR use the
scrambler function with the same setting. It is normal, that all users must use the same
radio model, because different manufacturers may use different scrambling methods,
which are not compatible.
VOX (Hands-Free Function)
The unit has a built-in Voice Activated Circuit (VOX) function. You can enjoy talking and
listening without pressing PTT Key. You can use this function preferably with an external
earphone (please note that the selected earphone must be suitable for VOX operation).
To turn on VOX function
Press " " key six times, LCD displays the icon
will flash. Press"
Sensitivity. After turning on VOX, LCD will display icon
You can plug in the earphone for hands-free talking & listening. Please speak close to the
mic in order to activate 'VOX' function. Make sure that the earphone is set to VOX mode (if
equipped with a switch) before it is plugged in!
Stop Watch
Press " " Key 7 times, LCD displays:
Press " " or "
And then press "
Lap Time
To get a lap time, press "
lap time while stop watch is running. Then press Key Lock Key again to switch back to stop
watch mode and show the running time.
Press " " or "
Press " " Key 4 times to exit.
Baby Monitor
This function can be used not only to monitor babies or handicapped persons, but as well
for acoustical monitoring of rooms. The function issimilar to VOX operation, but is
especially adjusted for baby and sound monitoring. One radio is set to baby monitor mode,
and another radio remains in normal mode and is used to receive the transmissions of the
baby's unit. To activate one radio as Baby Monitor:
Press " " Key 8 times, LCD display will show the "Baby" icon. Press "
to monitor sensitivity level from 1 to 3 (low to high level), OF is turn OFF this function.
Press PTT to confirm and quit. After turn on this function, LCD displays the "Baby" icon.
" key to select your desired the call tone.
" or " " key to select of, 1, 2, 3 for OFF, Low, Medium & High
" Key to start and press "
" Key to reset.
" or " " Key to start Press "
" Key to stop and press "
and the VOX sensitivity digit display
, press PTT to confirm and quit.
" or " " Key to stop.
" Key to reset.
EN
" Key to select a scrambler
" Key, it will stop to show the
" or " " Key