Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
Safety Lock (Press "+" & "-" at the same time)
In the working status, long press "+" and "-" at the same time to enter the lock mode
and the display will show "LOC", and time will be automatically confirmed after 5
seconds.
Then press "ON/OFF" to power off or to stop the lock mode. You can also press
simultaneously on "+" and "-" to stop the lock mode.
CLEANING
•
Before cleaning, unplug and wait for the appliance to cool down.
•
Wipe with a moistened cloth.
•
Do not clean with any abrasive scouring pad or steel wool, as this will damage the
finish.
•
Do not immerse in water or any other liquid.
TROUBLESHOOTING
TROUBLE
Power indicator lit off
Power off automatically
LED shows E0
LED shows E1
LED shows E2
LED shows E3
LED shows E4
LED shows E5
LED shows E6
LED shows E7
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
POTENTIAL CAUSES
Power
cord
connected
1. Spare parts over heat
2. No operation for two
hours
3. Air intake and/or outlet is
jammed
No pot or pot too small
Voltage is too low
Voltage is too high
Surface
temperature
sensor open circuit or short
circuit
Short circuit
Pot without water or dry
Overheat
Pot base not flat
7
RESOLUTION
is
not
Please ensure the plug
inserted into the socket
1.Restart the appliance
2.Please return it to a
service point for repair.
3.
Remove
blocking both air supply
and water supply
Put the suitable pot on the
surface of the cooker
Please
Voltage <270V
Please
Voltage <270V
Return it to the service
centre for checking and
repairing
Return it to the service
centre for checking and
repairing
Start
temperature cool down
(Make
contains water)
Please check if the air
intake
jammed. If not, please
return the cooker to the
service centre for checking
and repairing
Please use the suitable pot
all
objects
ensure
88V
<
ensure
88V
<
again
after
the
sure
the
pot
and
outlet
VG EKP 3000
is
Tabla de contenido
