Sangean BTS-102 Manual De Instrucciones página 5

Using the AC power adaptor to charge
the unit
This unit operates on a built-in Li-on battery that can be
recharged using the AC power adaptor. The AC power
required for this unit should be 12volts DC at 1.5A center
pin positive. Before operating the speaker for the first time
please fully charge the battery.
Insert the adaptor plug into the DC socket on the left side
of the speaker. ThenPlug the adaptor into a standard
mains socket outlet and the speaker will begin charging
the built in battery. Charging time is approx. 3.5hours
with speaker off and 8 hours with speaker on. The battery
indicator on the front panel will flash when the battery
charging is in progress. After the speaker is fully charged
the battery indicator will remain in solid white. Once fully
charged the battery will power your speaker for up to 20
hours depending on the volume level. Reduced power,
distortion, 'stuttering' sound or battery power indicator in
low are all signs that the battery needs to be recharged.
The AC adaptor should be disconnected from the main
supply when not in use.
IMPORTANT:
The mains adaptor is used as the means of connecting the
radio to the mains supply. The mains socket used for the
radio must remain accessible during normal use. In order
to disconnect the radio from the mains completely, the
mains adaptor should be removed from the mains outlet
completely.
4