Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3.2.6 Continuity/Diode Test
Function
If measured resistance
is less than 50Ω, the
buzzer will sound.
The display shows the
approx. forward
voltage drop
Overload Protection: 250V DC or AC rms; do not exceed
15 sec. continuous measurement.
3.2.7 Temperature Test
Measuring range
Resolution
-20°C ~ 0°C
1°C ~ 400°C
°C
401°C ~ 1000°C
-4°F ~ 32°F
33°F ~ 752°F
°F
753°F ~1832°F
Overload Protection: F1 400mA/600V
Description
Open circuit voltage:
approx. 2.8V
Forward DC current:
approx. 1mA
Reverse DC voltage:
approx. 3V
Accuracy
±(10% of reading +2 °C)
±(1.0% of reading +3 °C)
±2.0% of reading
±(10% of reading +2 °F)
±(1.0% of reading +3 °F)
±2.0% of reading
09
4. Operating Instructions
4.1 DC/AC Voltage
Warning
Max. input voltage: 600V DC or AC rms (200mV
range is 250V DC or AC rms).
Do not exceed the protection limits to prevent
electric shock and/or damage to the meter.
• Turn the rotary switch to the proper voltage range.
• Connect the red test lead to the V input jack and the black
test lead to the COM jack.
• Connect the leads to the voltage source or circuit under test.
• Read the measured voltage on the display.When measuring
DC voltage, the display will show the polarity of the red lead.
• If the display only shows "1", it indicates the input exceeds
the selected range.Move the rotary switch to a higher range.
4.2 Resistance
Warning
Turn off all power and discharge all capacitors
completely before making resistance
measurements.
Turn the rotary switch to the proper voltage range.
•
Connect the red test lead to the Ω input jack and the
•
black test lead to the COM jack.
Connect the leads to the resistance or circuit under test
•
and read the measured resistance on the display.
When measuring low resistances, short the test leads
•
and record the measurement.Then connect the leads to
the resistance to be measured and subtract the shorted
resistance.
10
Capítulos
Tabla de contenido
