Goodway SOOT-VAC VAC-2 Instrucciones De Operacion Y Mantenimiento página 5

into an appropriate outlet that is properly installed and grounded in accordance
with all local codes and ordinances.
WARNING: Improper connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
AIR VACUUMS
Static electricity can be generated when using air operated equipment. If the
equipment and accessories are not properly grounded, arcing can occur as
static electricity is dissipated. If ungrounded equipment is operated near
explosive materials or vapors, fire or explosion may result. FOR MAXIMUM
SAFETY, GROUNDED AIR LINES AND VACUUM HOSES MUST BE USED WITH
THIS EQUIPMENT. CONSULT THE GOODWAY CATALOG FOR GROUNDED
VACUUM HOSES AND ACCESSORIES.
Do not operate near flammable materials such as fuels, thinners, solvents, grain
dust, etc.
ELECTRICAL VACUUMS
OPERATING INSTRUCTIONS
1. Be certain to plug the vacuum into an outlet of the proper voltage.
2. No lubrication of the motor is required.
3. For top performance, clean the filters regularly.
4. FOR DRY RECOVERY, be sure the filter bags are in place.
5. FOR WET RECOVERY, remove the GTC-175 and GTC-176 filter bags.
Leave the VACP-51 Filter Guard in place on the VAC-2 and VAC-3A models.
6. Check carbon brushes periodically and replace when worn down to
approximately
7. To check and replace all VAC's except GTC-540 carbon brushes:
A. Pry spring clip off on the side of each brush holder and lift off the plastic
motor cap.
B. Unclip field wires from the spade terminal on each brush holder.
C. Remove the hex-head screw holding the brush holder in place.
/ " (13mm).
1
2
3