Displaying Access Point Information; Changing The Web Interface Language; Changing The Device Name; Configuring The User Mode - Resol KM2 Manual

7.8

Displaying access point information

In order to display access point information, proceed as follows:
Î Click the Status main menu.
The following information is displayed in Access point:
• Network name (SSID)
• Encryption
• MAC address
• Channel
• IP address
7.9

Changing the Web interface language

The Web interface can be displayed in different languages.
Î Click the flag to select the language.
• German
• English
• French
• Spanish
• Italian
The language is then changed for this session.
In order to select a language permanently, proceed as follows:
1. In the Configuration main menu, select the General submenu.
2. In the General Configuration menu, in the Language dropdown menu, se-
lect one of the following languages:
• English (en)
• Deutsch (de)
• Français (fr)
• Español (es)
• Italiano (it)
3. Click Save configuration.

7.10 Changing the device name

Note
Choose a descriptive device name to facilitate identifying the device in
the network.
In order to change the device name, proceed as follows:
1. In the Configuration main menu, select the General submenu.
2. In the General Configuration menu, enter the device name in the Device
name field.
Permitted characters are: letters, numbers, underscores, hyphens.
Special characters are not allowed.
3. Click Save configuration.
7.11 Configuring the user mode
The user mode of the Web interface can be changed from standard user to expert
and vice versa. In the expert mode, additional information and settings are available,
such as: LAN configuration, LAN information, firmware updates, etc.
In order to adjust the user mode, proceed as follows:
1. In the Configuration main menu, select the General submenu.
2. Activate the expert mode in the Expert mode menu item.
3. Click Save configuration.
7.12 Configuring date and time settings
The date and time configuration determines where the device obtains its date and
time information.
The device receives the date and time configuration automatically via the adjust-
able time zone (factory setting UTC). Settings can also be carried out manually.
In order to adjust date and time manually, proceed as follows:
1. In the Configuration main menu, select the Date and time submenu.
2. Tick the Set date / time field.
3. Adjust the date in the date field.
4. Adjust the time in the time field.
5. Click Save configuration.
31