Next Level Racing GT ELITE Manual De Instrucciones página 11

[email protected]
OVER-HANGING SEAT BRACKET
( )
FOR TALLER USERS
26c Align the first rear slot on the Seat Brackets with the T-Nuts previously installed in Step 22. Bolt
through and secure with 4 x M8 Bolts and Washers.
27 Align the holes on the Buttkicker pole with the T-Nuts previously installed in Step 22. Bolt through and
secure with 2 x M8 Bolts.
SHIFTER INSTALLATION
Note: Install T-Nuts on the
Left Vertical Post for a Left
Side Shifter setup.
28
Install 4 x T-Nuts into the outer channel of the Left or Right Vertical Post.
PARTS:
Repeat
on Other
• • 4 x M8 16mm Bolts
Side
• • 4 x M8 Washers
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 4 x T-Nuts
20
29 Align the slots on the bottom Shifter Mounting Corner Bracket with the T-Nuts previously installed in
Step 28. Bolt through and secure with 2 x M8 Bolts and Washers.
30
Align the slots on the Upper Shifter Mounting Corner Bracket with the T-Nuts previously installed in Step 28. Bolt through and
secure with 2x M8 Bolts and Washers. Leave bolts loosely tightened to allow installation of extra parts in the following steps.
OUTSIDE VIEW
31a
Install 4 x T-Nuts into the top and bottom side channels of the Shifter Arm.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 1 x Shifter Mounting Corner
Bracket
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 1 x Shifter Mounting Corner
Bracket
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 1 x Shifter Arm
• • 4 x T-Nuts
21