JORGENSEN PONY 60300 Instrucciones De Uso página 5

ADJUSTABLE CLAMPS
Take down the trigger clamp
from the worktable.
Remember to take the clamp
from the right side first and
then the whole clamp can be
pulled out easily. (Figure 5)
Adjust the trigger clamp according to your needs. (Figure 6)
1
PUSH
Remove the stationary jaw from the
clamp by pushing the press button.
2
Sliding the moveable jaw along the
bar of the clamp to the other end.
Pull out the button closest to the side you are using and align the trigger clamps with the slot and
insert it fully as shown. Once the clamps are inserted, release the button. (Figure 7)
Push the bench dogs into the desired holes on the table. (Figure 8)
2
Figure 5
3
Insert the trigger clamp to the slot on
the sides of the worktable.
Figure 7
4
EN
1
Figure 6
Figure 8