Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Temperature limit ranges
Minimum
Maximum
Resolution
While on the main screen, repeatedly press the button to switch to sensor 1, 2 or 3 and proceed for
each sensor as follows.
1. Short-press the
button four times.
2. Press the
button for 3 seconds and set the minimum outdoor temperature.
3. Short-press the
button and activate (ON)/deactivate (OFF) the outdoor minimum temperature alert.
4. Short-press the
button and set the minimum outdoor temperature.
5. Short-press the
button and activate (ON)/deactivate (OFF) the outdoor maximum temperature alert.
6. Short-press the
button and set the minimum indoor temperature.
7. Short-press the
button and activate (ON)/deactivate (OFF) the indoor minimum temperature alert.
8. Short-press the
button and set the minimum indoor temperature.
9. Short-press the
button and activate (ON)/deactivate (OFF) the indoor maximum temperature alert.
When the set temperature limit is exceeded, an audio alarm will sound for 1 minute and the value
will begin flashing.
Pressing any button on the screen cancels the alert sound, but the symbol of an active alert will con-
tinue flashing. Once temperature drops below the set limit, the symbol on the screen will stop flashing.
Temperature, Humidity and Pressure Trends
falling
Moon phases
1
2
1 – New moon; 2 – Waxing crescent; 3 – First quarter; 4 – Waxing gibbous; 5 – Full moon; 6 – Waning
gibbous; 7 – Last quarter; 8 – Waning crescent
Note: In the period between 18:00 and 06:00, the moon icon will be surrounded by stars.
Displaying Maximum and Minimum Readings of Temperature and Humidity
Press the
button repeatedly to gradually display the maximum and minimum temperature and
humidity values measured.
The memory of measured values is automatically erased every day at 00:00.
Or long-press the
button to erase the memory automatically.
Station Display Backlight
When powered via adapter:
Permanent backlighting is set automatically.
Repeatedly pressing the SNOOZE/LIGHT button will allow you to set 4 different levels of permanent
backlighting (off, maximum, medium, low).
When powered only by 3× 1.5 V AAA batteries:
Display backlighting is off. Pressing the SNOOZE/LIGHT button will turn the display backlight on for
5 seconds, then it turns off again. When the station is only powered by batteries, permanent back-
lighting of the display cannot be activated!
Outdoor
-50 °C to +10 °C
28 °C to +70 °C
0.5 °C
constant
3
4
5
6
Indoor
0 °C–23 °C
26 °C–50 °C
0.5 °C
rising
6
7
8
Tabla de contenido
