aflamo AV-WM36IMP Manual Del Propietário página 12

COLOR button: Makes the color flame
effect changing.
NOTE: color effect stays on until power
button is turned off. Color flame effect
COLOR
must be on for heater to turn on.
HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
HEATER
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
LED Ember light button ( 1 ): Makes the color
on bottom effect changing.
NOTE: Ember color effect stays on until power
button is turned off.
1. Press once. Indicator light turns on.
Flame color effect gets changing.
2. Press again until desired setting is
reached.Display window shows setting.
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
2. Press again. Indicator lights up.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
1. Press once. Ember color effect gets
changing.
2. Press again. until desired setting is reached,
in total 10 colors recycling.
Note: When you press the button with 11
the ember light will doing auto cycle.
www.aflamo.com
time,
th
12