KAISDA K6 Guia Del Usuario página 7

3. Headlight installation:
3.1 Loosen the headlight screw from the front fork; install the headlight
and the front fender ears in the front fork screw hole, and tighten the screw
with an Allen tool.
Front wheel installation ：
4.
4.1 Cut the wrapping rope, remove the front wheel, remove the front
fork protection lever and the front wheel protection cover.
4.2 Make sure that the front wheel is in line with the rear wheel, then start
installation. First pull the wheel upwards, put the disc brake pad into the
front brake caliper, and then use 15 wrench to tighter the front hub fixing
screw, and then use tool to lock the mud board supporter on the front fork
leg.
4.3 Adjust the adjusting screw of the disc brake to make the disc brake
rotor without obvious friction
Bicycle Rack installation:
5.
5.1 First align the mounting holes of the rack with the mounting holes on
the frame, and then use an M4 hexagon wrench to tighten the mounting
-5-