Craftmade SLH52 Instrucciones De Instalación página 5

Step 8
lade Installation
bber cushions, saving motor
blade installation. Using
ws (S6) provided, line up
the blade arm with the holes
or housing. Tighten screws
Step 9
the Switch Housing Assembly (4), locate both modular wiring
d (B). One extends from the mounting plate (E) on bottom
and one extends from the Switch Housing (4). Align the two
latch on the side of the plugs will engage when pushed together.
o plugs firmly together until latched.
witch housing screws (S9). Raise switch housing cover (4) and
ounting holes with the holes on mounting plate (E). Once the
gned, attach the switch housing cover using the switch housing
and tighten firmly.
T: Be sure that no wires are caught in mounting slots or pinched between
g and mounting plate.
Screws
Modular Wiring Plug (A)
Slots (D)
TION
duce the risk of personal injury, DO NOT bend the blade arms when
ing them. When balancing the blades, or cleaning the fan, do not insert
n objects in between rotating fan blades.
All manuals and user guides at all-guides.com
Mounting Plate (E)
Modular Wiring Plug (B)
Switch Housing (4)
10
Optional Light Kit Installation
Remove three screws from side of switch hub (as shown in figure below).
Remove hub cover from hub and pop out center plug. Carefully thread
wires from light kit through the center hole in hub cover. At this point
attach light kit into hub cover by screwing center all-thread from light kit
into the center hub cover. Lock the all-thread in place on the inside of the
hub using the 3/8" nut provided. Attach white wire from light kit to white
wire in hub, using wire nuts. Next, attach black wire from light kit to blue
wire in switch hub. Carefully push wires up into hub and replace hub cover
using screws removed earlier.
Screws
Center Screw
Switch Hub
Center Hole
Remove Finial