Applying The Arm Cuff - Health O Meter UPPER ARM Manual De Instrucciones

Applying the Arm Cuff

1. Plug the cuff connector tube (A) into the unit.
2. Unwrap the arm cuff, leaving the "Index" end of the cuff through
the metal D-ring (B) of the cuff.
A
3. Put your left arm through the cuff loop. The "OK" range indication should
be positioned at the top with the rubber tube pointing downward in the
direction of your forearm. Position the artery mark [
main arteries on the inside of your arm as shown in the figure below.
The tube should be running down the center of your arm.
All manuals and user guides at all-guides.com
B
] over the
1.0 Inch
2 - 3 cm