Charging Time - Parkside Performance PPHSA 40-Li A1 Traducción Del Manual De Instrucciones Original

Max.­cutting­capacity ...........appr.­24­mm
Weight ...........................................3 kg
Sound­pressure­level­
(L ) .................... 82.4­dB(A),­K
pA
Sound­power­level­(L
guaranteed ........................... 96 dB(A)
measured .... 93.4­dB(A);­K­
Vibration (a ) max. 1.76 m/s
h
Type­of­battery­to­be­used ................ Li-Ion
Temperature...........................max.­50 °C
Charging­process ...................4­-­40 °C
Operation .......................... -20­-­50 °C
Storage .................................0­-­45 °C
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The­specified­total­vibration­value­and­the­
stated noise emission value have been
measured according to a standardised test
method­and­can­be­used­to­compare­one­
power­tool­with­another.
The­specified­total­vibration­value­and­the­
stated­specified­noise­emission­value­can­
also­be­used­for­a­provisional­assessment­
of the load.
Warning: The vibration and noise
emissions­may­deviate­from­the­spe-

Charging time

(min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1
=3 dB
pA
)
WA
= 2.29 dB
WA
;­K=1.5­m/s
2
PAP 20 A1
PAP 20 A2
PAP 20 B1
60
45
35
35
35
cified­values­during­actual­use­of­the­pow-
er­tool,­depending­on­how­the­power­tool­
is­being­used­and,­in­particular,­what­kind­
of material is being worked on.
Safety­measures­for­the­protection­of­
the­operator­are­to­be­determined­that­
are based on an estimate of the actual
vibration­load­under­the­real­operating­
2
conditions­(for­this,­all­parts­of­the­opera-
ting cycle are to be taken into account, for
example,­times­in­which­the­electric­tool­is­
turned off, and those during which it is tur-
ned on but running without a load).
Charging time
The­device­is­part­of­the­Parkside­X 20 V­
TEAM­series­and­can­be­operated­with­bat-
teries­of­the­Parkside­X 20 V­TEAM­series.­
Batteries­of­the­Parkside­X 20 V­TEAM­
series may only be charged using chargers
of­the­Parkside­X 20 V­TEAM­series.
We­recommend­that­you­operate­this­ap-
pliance­with­the­following­batteries­only:­
PAP 20 B1,­PAP 20 B3.
We recommend charging these batteries
with­the­following­chargers:­PLG 20 A3,­
PLG 20 A4,­PLG 20 C1,­PDSLG 20­A1
An­up-to-date­list­of­battery­compatibility­
can be found at: www.lidl.de/akku
PAP 20 A3
PAP 20 B3
90 120
60 80
45 60
45 60
40 40
GB
Smart Smart
PAPS 204 A1 PAPS 208 A1
120
80
50
50
40
IE
210
165
120
120
50
23