CGM 3300I Manual Del Operador página 50

OFF
STOP
Circuit breaker
When the generator is overloaded or overheated
for a long time, the thermal protector works.
Under protected, please reduce the load or run it
for a few minutes without load. Press the
thermal protector button, then output recovers.
Note: The thermal protector is influenced by
factors, such as operation current and ambient
temperature, so the protection time varies.
Parallel kit terminal
It is used for parallel operation with another
inverter (parallel kit sold separately).
RUN
CHOKE
Fuel tank cap
Remove the fuel tank cap by rotating it anticlockwise.
Ventilation knob (If applicable)
The fuel cap is equipped with a ventilation knob to
prevent fuel leakage. During operation, the
ventilation knob must be in the "ON" position for the
generator to operate normally. When the generator
will not be use for a long time or needs to be
transported, turn the ventilation knob to the "OFF"
position to prevent fuel leakage.
Telescoping handle
When moving the generator, please hold the
telescoping handle and press the button on it, and pull
it outward.
Note: Before moving, please turn off the generator
and fuel switch. Please move the generator on a
relatively flat ground. Do not perform the movement
on a surface where the pit exceeds 40mm.
12