Rs-485; Gpio; Usb Soundcard - Optimus MXD-88 Manual De Instalación Y Funcionamiento

MXD-88 INSTALLATION
DSP AUDIO MATRIX
Port setting: 115200 baud (default), 8 data bits, 1 stop bit, no parity, no flow control.
4.6. RS‐485
Used for RS‐485 serial communication port, for third‐party control device. Terminals A, B and GND.
Port setting: 115200 baud (default), 8 data bits, 1 stop bit, no parity, no flow control.
4.7. GPIO
‐channel logic input/output. Direction and Trigger type (high/low level) can be set in the software.
4
4.8. USB Soundcard
USB Soundcard is used for recording and broadcasting audio using personal computers.
The cable used is Type‐B USB. For initial connection, "Found New Hardware" will pop up on
computer screen, and the driver will be installed automatically. After installation, USB soundcard
will appear in computer soundcard list. Users may select USB soundcard in soundcard setting at
software playlist.
For more Soundcard options configuration software is required.
MXD-88 INSTALLATION Version 1.1 Page 7 of 11