Maxell MSS-IRC1 Manual De Uso página 3

Bu�on ac�vi�es and LED indicator:
(1) Power connector: 5V 1A Micro USB
(2) Bu�on: Press and hold the bu�on for 5 seconds to enter into
Wi-Fi connec�on (or configura�on). The LED indicator will blink
rapidly (EZ mode) or slowly (AP mode). EZ mode connec�on is set as
default in Wi-Fi configura�on. Press and hold the bu�on for 5
seconds will enable the device switch between EZ mode and AP
mode.
(3) LED indicator: indicate the device working state
EZ/AP Mode: Indicator flash rapidly / flash slowly
Network connected, normal working state: Indicator keeps on.
Network connected, sending data: Indicator flashes one �me.
Enter learning mode: Indicator turns off.
Receive learning IR code command: Indicator turns on.
4. SPECIFICATIONS
Input voltage range
Opera�ng Current
Power Supply
IR Emi�ng Wavelength
IR Distances
IR Learning Distances
IR Angle
IR receiving frequency
Radio Frequency
Wi-Fi standard
Data transmission rate
Operating temperature
Storage temperature
Relative humidity
5V
110mA
Micro USB power adapter with 5V/1A
940mm
8M
3CM
3600
38KHz
2.412-2.484GHz
IEEE802.11b/g/n (channel 1-14)
11b: 1, 2, 5.5, 11 (Mbps)
11g: 6, 9, 12, 18, 24, 36, 48, 54 (Mbps)
C ∼ -40
11n: HT20 MCS0-7
C ∼ -60
0 0
-10 C
8% ∼ -80
0 0
-20 C
%
2
EN