UFESA Apex Manual De Instrucciones página 18

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
hold the basket by the handle.
5. Press shortly the power standby button to turn on the air fryer.
Using the pre-set programmes:
With the air fryer switched on, press the menu button (M) to switch between the different
programmes. Each time you press the menu button (M), the mode is selected from left to
right. Press the power button to select the desired mode and start cooking. Each mode
has an assigned time and temperature. To change these you can press the +/- time and
+/- temperature buttons before pressing the power button.
Manual Mode:
6. Press the temperature control touch button to the required temperature.
7. Press the timer touch button to the required preparation time, press shortly the power
standby touch button to start cooking, the working logo lights and rotates.
1)
The fan indicator light (outside white lamp) lights and rotates;
2)
The heat indicator light (center red lamp) lights when the temperature didn't
reach the setting temperature or the temperature come down;
3)
The air fryer stops heating and the heat indicator light (centre red lamp) goes off
when the temperature reached the setting temperature.
4)
The heat indicator light will go on and go off several times during frying.
8. Add 3 minutes to the preparation time when the appliance is cold, or you can also let
the appliance preheat without any ingredients inside approx. 4 minutes.
9. Some ingredients require shaking halfway through the preparation time. To shake or
turn over the ingredients, pull the basket out of the appliance by the handle and shake it or
turn over the ingredients by fork (or tongs). Then put the basket back into the Airfryer.
10. When you hear the timer bell, the set preparation time has elapsed. Pull the basket
out of the appliance and place it on a heat-resistant surface. Check if the ingredients are
ready. If the ingredients are not ready yet, simply slide the basket back into the appliance
and set the timer to a few extra minutes.
11. To remove the ingredients, pull the basket out of the Airfryer. The basket and the ingre-
dients are hot. You can use a fork (or tongs) to take out the ingredients. To remove large
or fragile ingredients, use a pair of tongs to lift the ingredients out of the tank. Empty the
basket into a bowl or onto a plate.
12. To program a delayed start, once the time and temperature have been set, press the
delayed start button (9) and select the desired time with the +/- time buttons. Press the
power button to confirm. Delayed start can be set from 0.5h to 24h.
MAIN COOKING RECIPES
This table below helps you to select the basic settings for the ingredients you want to
prepare.
NOTE: Keep in mind that these settings are indications. As ingredients differ in origin, size,
shape as well as brand, we cannot guarantee the best setting for your ingredients.
18
Tabla de contenido
loading

Tabla de contenido