-
fill the kettle with 0.75 litre of water and bring it to boil,
-
switch the kettle off and disconnect the kettle from the power supply,
-
pour 0.1 litre of white vinegar into the kettle,
-
allow to stand overnight,
-
discard the solution and rinse the inside with water,
-
fill the kettle with 1 litre of water and bring to boil,
-
discard the water and rinse the inside with water.
•
no timely removal of the scale from the heating element results in the heating element's
quicker wear,
•
any damage resulting from applying harsh descalling products available in the market
are not covered by the producer's warranty,
•
if the power cord is damaged, it can be replaced only by an especially constructed one
(with appropriate plugs and endings).
FILTER
The filter provided is made of mesh retaining scale deposits. The filter does not remove the
scale, but it prevents any deposits from getting inside the kettle while the water is being
poured in.
The filter should be cleaned regularly.
Hard water may block the filter after boiling water a couple of times.
10