Advanced - AVARRO 0E-HDMIMX4 Manual

By default, HDCP Support is switched to ON at each input and content
protected by HDCP standard will be received.
(7) Preset
The Preset section saves or loads the General settings to or from the matrix.

Advanced

The Advanced page includes: Network, Login Password, WEB Firmware
Upgrade, ARM Firmware Upgrade, MCU Firmware Upgrade, System, Firmware
Version.
(1) Network
Network is used to toggle between the dynamic and static IP addressing.
DHCP: When enabled, the IP address of the Matrix is assigned

automatically by the DHCP server connected.
Static: When enabled, set up the IP address manually.

Apply: Click to enable the network setting.

The default setting is DHCP.
Note:
When "Static" is selected, please ensure your PC is in the same network

segment as the Matrix, i.e. the IP address of your PC should be set as
192.168.xxx.xxx (x is suggested among 2 to 253).
For more information please call 1-833-574-9124 or email [email protected]
16
··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us