Tabla de contenido
wardrobe assembly
Step 1 – top panel
Insert four wooden dowels
Secure each top bar (2), with the lip facing outward, onto the top panel, using six 25mm screws
the top panel.
Step 2 – outer frame
Insert four wooden dowels
support panel (5). Secure the bottom panel using two bolts (D), top panel
centre support panel to the left side panel (4), making sure all of the wooden dowels
bolts are tightened with the supplied allen key (M).
Step 3 – right side panel
Secure the right side panel
panel and two bolts
and bolts are tightened.
Step 4 – back panel
Stand wardrobe upright and secure the two back panels
Step 5 – fitting shelves
Top shelf: insert two shelf brackets
desired height. Place a shelf unit
Bottom shelf: repeat step 5.
Step 6 – magnetic catches and rails
Affix the four magnetic catches (K), two to the top panel and two to the bottom panel using two
screws per magnetic catch.
Secure 2 rail brackets
per bracket.
Step 7 – rails
Top rail: insert a rail
(H)
the free end of the rail. Using three 16mm screws (B), secure to the left side panel at the desired height.
Bottom rail: repeat step 7.
Step 8 – doors
Preparing the six hinges (J); each hinge needs to be split into its two components. Loosen screw
by half-a-turn and separate the hinge spring
Affix three hinge springs to each door
(E)
into the top panel
(E)
into the bottom panel
(6)
to the assembled piece using four bolts (D), two bolts
(D)
for the top panel. Again, make sure all of the wooden dowels
(F)
into the right side panel and two into the left side panel at the
(8)
onto the four shelf brackets and secure with four screws.
(G)
to the right side panel at the desired height using three 16mm screws
into the affixed rail bracket on the right side panel, place a rail bracket
(9)
(1)
and four wooden dowels
(3)
and four wooden dowels
(7)
using forty 16mm screws (C).
(J4)
from the hinge bracket (J3).
using two 16mm screws
(E)
into each top bar (2).
(E)
into the centre
(1)
using two bolts
(E)
(D)
(E)
(B)
per hinge spring.
(A)
for
(D)
and
are aligned and
for the bottom
are aligned
(B)
(G)
over
(J1)
Tabla de contenido
