Installation Instructions; Parts And Features - HURAKAN HKN-WNC160CD Manual De Instrucciones

Note: This appliance contains flammable materials in refrigerant pipes and compressor.
Please avoid contact fire source during using, service and disposal.
Please ask a professional for servicing when the machine broke down. Please send it to
your local appointed disposal station when you discard it.
 This appliance is designed to be free standing only, and should not be recessed or built-in.
 Place your appliance on a floor that is strong enough to support the appliance when it is
fully loaded. To level your appliance, adjust the leveling legs at the bottom of the appliance.
 Allow 10 cm of space between the top, the back and sides of the appliance, which allows
the proper air circulation to cool the compressor and condenser.
 Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the unit not to perform
properly.
 Avoid locating the appliance in moist areas.
 Plug the unit into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Products service center.
 After plugging the appliance into a wall outlet, allow the appliance to cool down for 2-3
hours before placing any items in the compartment.
-Save these instructions-

INSTALLATION INSTRUCTIONS

PARTS AND FEATURES

1: Upper Hinge
2: Door Gasket
3: Partitions
4: Shelves
5: Display Shelves
6: Adjust Foot
7: Bottom Hinge
EN
15