Bigben PARTY PARTYBTMIC2 Manual De Instrucciones página 13

1. Microphone volume adjustment button
2. ON/OFF/PAUSE button
3. MODE button
4. Next song / Volume + (increase the volume)
5. Previous song / Volume - (decrease the volume)
6. ECHO button
7. Micro SD card port (TF)
8. USB port
9. Micro USB charging port
10. Headset jack
Operation
Before using the device, charge it using the USB charging cable.
Microphone speaker functions
1. Press and hold the power button for 2 to 3 seconds to turn on the speaker. You'll hear a
sound signal when it powers on.
2. Set your device to Bluetooth mode, find the "PARTYBTMIC2" function, and then click on
it to connect. You'll hear a sound signal once the connection has been established.
3. Press button 4 and hold it down to increase the volume. Press briefly to select the next
song.
4. Press button 5 and hold it down to decrease the volume. Press briefly to select the
previous song.
5. Slide button 1 upwards to increase the vocal volume. Slide it downwards to decrease
the vocal volume.
6. Slide button 6 upwards to increase the ECHO effect. Slide it downwards to decrease
the ECHO effect.
7. Press the Mode 3 button briefly to switch between the Bluetooth/Selfie/Micro SD/USB
functions.
8. Double press the Power 2 button to remove the additional voice from the music. Double
press again to restore the original music.
9. Press and hold the Mode 3 button to change the vocal effect.
10. Press button 2 briefly to pause/play the music.
11. Double press button 3 to switch the lighting effects on/off.
12. Insert the micro SD card into port 7 to play music from the micro SD card (max. capacity
: 32 GB).
13. Insert the USB stick into USB port 8 to play music from the USB stick (max. capacity :
32 GB).
14. Plug your headset into the jack 10 to listen to music.
15. Press and hold the power button for 2 to 3 seconds to switch off the speaker. You'll hear
a sound signal when it powers off.
- EN 13 -