Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IMPORTANT INFORMATION
This appliance is not intended for long-lasting use. You should never exceed the maximum
operating time of 1 minute. Failure to follow this instruction carefully may result in damage
to the motor. Please make some operation breaks regularly. The breaks should last at least
3 minutes.
•
Care is needed when handing cutting blade
•
Remove the chopper blade before emptying the bowl.
•
Never remove the cover over the chopper until the blade has completely stopped.
•
Do not fill the beaker above 500g
BEFORE THE FIRST USE
•
Wash the bowl, lid, chopper blade and axle unit in warm soapy water and dry
thoroughly.
•
Wipe the motor unit and lid of the chopper with a damp cloth.
•
Rinse the detachable metal leg under warm running water, wipe the blade with a
damp cloth and dry thoroughly.
•
Remove the stainless steel whisk from the whisk body and wash in warm soapy water,
wipe the whisk body with a damp cloth and dry thoroughly.
SPEED SETTINGS
Depending on the accessory you are using, we recommend you to use the following
speed setting.
STICK ATTACHMENT:
WHISK:
CHOPPER:
USING THE STICK MIXER (motor unit and metal leg)
•
Twist the stick blender onto the unit at anti-clockwise until it is locked. Then use gentle
hand pressure only to ensure that the shaft is fully tightened onto the motor unit.
•
Put the ingredients into the bowl or a suitable container (such as a mixing bowl or pan).
Do not overfill to prevent splashing. The beaker must be not more than 2/3 full to
prevent over flowing.
•
Do not use the stick blender to blend hard foods only, such hard foods only, such as
coffee bean, ice cubes, sugar, cereals, chocolate etc.
•
Always use the stick blender to blend ingredients together with water or other liquid.
•
Plug the unit into a suitable mains socket.
•
Hold the unit securely and press the on/off button.
•
When mixing liquids ensure the blade is fully immersed before switching on the
appliance to prevent splashing.
•
Never remove the unit from the liquid until the blade has totally stopped spinning.
•
When you take out the stick from the motor unit, make sure of it unplugged.
•
Its blade is sharp; handle it with care to avoid any hurt of you.
TKG CMM 1010 CW
speed I or II
speed I
speed I or II
6
Tabla de contenido
