1. Manuales
  2. Marcas
  3. Prestige Manuales
  4. Transmisores
  5. APS-OE2B
  6. Guía de programación

Prestige APS-OE2B Guía De Programación

Ocultar thumbs
1
2
3
4
5
6
7
8
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

All manuals and user guides at all-guides.com
TRANSMITTER PROGRAMMING GUIDE
The transmitters included with the system have been pre-programmed
at the factory, with each button pre-assigned to control a specific
function of the system. Although the system in the vehicle has either
a 2 or 3 channel receiver, depending on the model, the transmitters
included with the system are capable of transmitting 3 distinct signals.
This allows you to program each transmitter to more than one vehicle
in two car families, and also allows you to change which button(s)
control certain functions of the system.
( Example: Transmitter channel 3 can be programmed to activate
Receiver channel 2. ) Refer to the chart below for access to each of the
transmitter channels, and for the standard factory button assignments.
TRANSMITTER
CHANNEL BUTTONS
CHANNEL
1
ARM
DISARM
2
OPTION
3
ARM
DISARM
& OPTION
Some of the more common accessories for these additional channels
are;
*AS 9154
Remote Garage Door Interface
*AS 9075
Remote car starter
*AS 9153
Remote window roll up
*AS 9256
Remote trunk release relay
** Only Available With Some Systems
Released 9-24-99
Rev A: References to the APS-33, 3-6-02.
Model : APS-OE2B
SYSTEM RECEIVER
FUNCTION
1
Remote Arm/Disarm
& or **Remote Lock/Unlock
**Remote Emergency Panic
2
* Pulsed Output for Accessories
3
* Switched Output for Accessories
* Second Vehicle Control
128-5544A
1 OF 4
loading

Manuales relacionados para Prestige APS-OE2B

Resumen de contenidos para Prestige APS-OE2B

  • Página 1 All manuals and user guides at all-guides.com Model : APS-OE2B TRANSMITTER PROGRAMMING GUIDE The transmitters included with the system have been pre-programmed at the factory, with each button pre-assigned to control a specific function of the system. Although the system in the vehicle has either a 2 or 3 channel receiver, depending on the model, the transmitters included with the system are capable of transmitting 3 distinct signals.
  • Página 2 All manuals and user guides at all-guides.com PROGRAMMING THE TRANSMITTERS It is important to remember that during programming, each individual step of the procedure must be executed within 15 seconds of the previous step. When the 15 second time limit is allowed to expire, the system will automatically terminate the programming mode.
  • Página 3 All manuals and user guides at all-guides.com 12. Press and hold the Arm/Disarm Icon and Option transmitter but- tons simultaneously until the sounding device emits a long beep, indicating the signal has been stored into memory. 13. If you have additional transmitters ( up to 4 ) that need to be programmed, repeat step 12 for each transmitter.

  • Página 4: Important

    All manuals and user guides at all-guides.com ORDER FORM FOR 2 BUTTON TRANSMITTER MODEL NO. APS-OE2B Please indicate which transmitter pad is used with your transmitter as shown, PDOE2B-1 or PDOE2B-2 IMPORTANT : To help us expedite your order, please print all of the information legibly, and mail this form and your payment according to the instructions below.
  • Página 5 All manuals and user guides at all-guides.com Model : APS-OE2B GUÍA PARA LA PROGRAMACIÓN DEL TRANSMISOR: Los transmisores que vienen con este sistema fueron preprogramados en fábrica y cada botón fue preasignado para controlar una determinada función del sistema. Si bien el sistema del vehículo tiene un receptor de 2 canales o de 3 canales, según el modelo de que se trate, los...
  • Página 6 All manuals and user guides at all-guides.com PROGRAMACIÓN DE LOS TRANSMISORES Es importante recordar que durante la programación, cada uno de los pasos individuales del procedimiento deben realizarse en un plazo de 15 segundos del paso anterior. Cuando se deja pasar ese período de 15 segundos, el sistema suspenderá...
  • Página 7 All manuals and user guides at all-guides.com 11. El indicador LED del tablero destellará tres veces y el dispositivo sonoro sonará tres veces, indicando que el sistema está listo para aceptar la programación del canal 3 del receptor (solamente para algunos modelos). 12.

  • Página 8: Importante

    All manuals and user guides at all-guides.com FORMULARIO DE PEDIDO PARA EL TRANSMISOR DE 2 BOTONES MODELO Nº APS-OE2B Sírvase indicar qué modelo de transmisor usa de acuerdo con la siguiente ilustración: PDOE2B-1 ó PDOE2B-2 IMPORTANTE: Para ayudarnos a acelerar el envío de su pedido, sírvase escribir con letra de molde y en forma legible toda la información...