Vision TM-TELE Manual Del Propietário página 6

7. FIT SAFETY TETHER It is good practise to attach the projector to the pole with a "back up"
safety cable in case the bracket is abused and fails.
8. ADJUST POLE LENGTH Loosen the collar in the middle of the pole and adjust as required.
A safety stop limits travel and prevents the two parts separating.
NOTE: As a rule of thumb the projector lens should typically be about 300mm above the
top of the projection screen.
9. ADJUST TILT Turn projector on and adjust mount roll, pitch, and yaw.
6
TM-TELE_manual_en.doc