Dimmer Control; Indoor Temperature - Akai ACP-64 Manual Del Usuario

2. DIMMER CONTROL

The DIMMER switch (3) allows you to set the brightness of the LED display
3. AUTO CHANGE DISPLAY CONTENT
In radio off mode, press the VOLUME UP / DISPLAY AUTO CHANGE ON/OFF
button (8) and keep depress over 2 seconds to enter time display auto change
mode to display the Year. Press again to display Month/Day/Temperature, the
display returns to time display after 5 seconds.
YEAR Indicator

4. INDOOR TEMPERATURE

- Indoor temperature sensor is at the back of the unit. The unit detects the
current environment temperature.
- In order to display the indoor temperature in °C or °F, first turn on the
"AUTO CHANGE DISPLAY CONTENT" (refer to the corresponding above
paragraph).
- During Auto Change display content mode, when temperature is displayed,
press on >> (10) key to toggle between temperature in Celsius to
Fahrenheit.
- The detection range of indoor temperature is between 0°C & 50°C or 32°F &
122°F.
5. SELECT DST (DAYLIGHT SAVING TIME) MODE
For countries with daylight saving time (DST), the clock radio offers you DST
option to adjust summer time.
In standby mode press and hold >> / TUNE +/DST/C-F button (10) for 2
seconds. The clock advances by one hour. To exit DST mode, repeat the above
operation.
6. PROJECTION UNIT
- Focus setting: Adjust the projection clock brightness/focus by turning the
brightness/focus adjustment wheel unit the projected time is clearly shown
on the ceiling or wall.
- Adjust projected direction.
- To flip projected image by 180°, press PROJECTION TIME 180° FLIP/TIME-
TEMPERATURE button (6).
All manuals and user guides at all-guides.com
OTHER FUNCTIONS
MONTH Indicator
15
DAY Indicator