Simplicity Conquest Serie Manual Del Operador página 15

Ocultar thumbs Ver también para Conquest Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Dashboard Display
Refer to Figure 3.
A. FUEL LEVEL
Indicates the amount of fuel in the fuel tank. Left is empty;
right is full.
B. HOUR METER / CLOCK / SERVICE INDICATOR
Displays the clock, hour meter, and maintenance
reminder.
C. SELECT BUTTON
Used to set the clock and reset the maintenance
reminder.
D. SET BUTTON
Used to set the clock and reset the maintenance
reminder.
E. PTO LIGHT
Indicates the PTO switch is in the ON position.
F. CRUISE CONTROL LIGHT
Indicates that the cruise control is engaged.
G. LOW OIL PRESSURE LIGHT
Indicates that the engine oil pressure is low. The
light will turn on when the tractor is first started
and then go out. IF THIS LIGHT TURNS ON
WHILE THE TRACTOR IS IN USE,
TURN THE ENGINE OFF IMMEDIATELY. Contact your
authorized dealer for service.
H. LOW VOLTAGE LIGHT
Indicates that the electrical system voltage is low.
The light will turn on when the tractor is first started
and then go out. IF THIS LIGHT TURNS ON
WHILE THE TRACTOR IS IN USE,
TURN THE ENGINE OFF IMMEDIATELY. Contact your
authorized dealer for service.
en
FEATURES AND CONTROLS
A
H
G
Figure 3. Dashboard Display
Dashboard Functions
DASHBOARD DISPLAY MODELS
Display Total Running Hours - When the key switch is
first turned to the RUN position, all warning indicators will
light and the total running hours will be displayed. Be sure
all lights are functioning.
Display PTO Hours - Turn the key OFF, engage the
PTO, and turn the key to RUN (engine off).
Set the Clock - Start the engine, leave the engine
running. Depress the select button (C, Figure 3) for three
(3) seconds and release. Depress set button and HOLD
to advance time. Depress select button to select minutes.
Depress and HOLD set button (D) to advance time.
Leave alone for 5 seconds and clock will activate. Shut
off engine.
Demonstration Mode - With the engine off, hold down
the set button (D) and turn the key switch to RUN.
Maintenance Reminder - A maintenance reminder
will display in the information window (B) after the first
5 hours of operation, and then after every 50 hours.
The reminder will automatically reset after 5 hours. The
reminder can be manually reset by turning the key switch
from OFF to RUN (with engine off) and then depressing
the set (D) and select (C) buttons simultaneously for 5
seconds.
B
D
C
Cruise
PTO
F
E
15
Tabla de contenido
loading

Tabla de contenido