Operation - Senix LSPG-L2 Manual Del Operador

Blade Control
Starter Rope Handle
Rope Guide
Recoil Starter Rope
BLADE CONTROL
The blade control is attached to the upper handle of the mower. Depress and hold it
against the upper handle to start the mower. Release to stop the engine and blade.
WARNING
This blade control is a safety device. Never attempt to bypass its operation.
SIDE DISCHARGE COVER
The side discharge cover needs to be attached when side discharging. Follow
instructions in the assembly section to use the side discharge cover.
WARNING
Keep hands and feet away from the chute area on cutting deck. Refer to warning
label on the unit.
10
Lower Handle
Oil Tank Cap
Rear Wheel
Side Discharge Cover

OPERATION

Upper Handle
Star Knob
Cable Clamp
Front Wheel
RECOIL STARTER
Pull the recoil starter rope to drive the recoil starter until the engine starts. Recoil
starter rope can be clamped into the rope guide on the right upper handle for
facilitating the pulling operation. Stand behind the unit, hold the blade control,
then pull the recoil starter rope to start the unit.
PRIMER
The primer is located on the left side of the engine. The primer is used to pump fuel
into the carburetor and aid in starting the engine.
Fuel Tank Cap
Primer
Mower Deck
WWW.SENIXTOOLS.COM