Features; Modes And Functions - Create SPEAKER RETRO Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
The device is equipped with a built-in rechargeable battery (5V / 1800mA), so it could work
without external power equipment if there were enough power with it. The user could also
connect the device with a power cable to the adapter along with the device or any other power
supply with a 5V 1500 mA output.
BLUETOOTH MODE
• Stirring the power switch to the ON position, the device will be working and start from Blue-
tooth by default if there was no USB flash connected with the device by the USB interface.
• The LED light turns on in green colour. The User needs to use the mobile phone, tablet, laptop,
etc., to pair it and connect the device manually.
• The user can operate the utility knobs/keys on the device to play/pause or select previous or
next tracks by short press the related keys.
• Long pressing Play/Pause key the user can check the equalizer settings. Also by rotating the
related knob to make volume/treble/bass adjustments.
USB MODE
• Input a USB flash drive already with stored music. The device will change to USB mode auto-
matically. Now the LED light is out.
• Operations are the same as with Bluetooth mode.
Tip: The device ideally supports 64GB flash drives and part of 128GB flash drives (mixed stor-
ing of too large non-music files may affect the device performance in reading the USB flash
drive).
AUX INPUT
• Connect the device to a music source with an audio cable with one end in 3.5 mm tip to the
AUX IN interface, (the audio cable is not included with the device).
• The LED light will be red. The user could make related operations accordingly, please refer to
the introduction of Bluetooth function.
Tip: The function of selecting music through Pre/next keys could not be performed under the
AUX IN mode.
CHARGING THE DEVICE
• The device contains a 1800 mA rechargeable battery.
• The user could charge the device with the included power adapter of 5V 1500 mA.
• The charge light will be out when the battery is fully charged.
Tip: The device could be charged while working.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.

FEATURES

MODES AND FUNCTIONS

E NGLI SH
7
Tabla de contenido
loading

Tabla de contenido