Jimmy JF41 Pro Instrucciones De Uso página 10

3. When installing the front cover, the arrows
" and " " should be aligned. Rotate the front
cover clockwise until "
Tighten the screw and finish the installation.
Cleaning and maintenance of all parts
Parts that can be cleaned with water: Rear cover, fan
blade, front cover .(Picture 14)
Use neuter kitchen cleaner to dip wet soft cloth or
sponge and then clean the parts. After cleaning,
please put them in cool and dry place, avoiding direct
sunlight.
Parts not to be cleaned with water: fan blade knob,
motor & control assembly, support pole and base
assembly.(Picture 15) Please use a soft dry cloth to
gently wipe them, do not use banana oil, volatile oil,
detergent, alkaline cleaning fluid.
Note: Do not put them into the water to clean, so as not to burn the internal electrical parts and damage the machine.
Storage
If the machine is to be long idled, unplug the power cord and store it in a dry place.
8
"
" and " " are aligned.
14
Rear Cover Fan blade
15
Fan blade
knob
Rear
housing
Support ＆ base assembly
Front cover