Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Tank Sprayer Safety and Operating Instructions
BackSaver -
GP1, GP2, GP3
AVAILABLE PARTS
Pump Assembly -
Hose/Discharge Valve -
Discharge Valve (trigger) -
Spray Wand -
Adjustable Nozzle Tip -
Pickup Tube -
Pump Maintenance Kit -
Tank Sprayer Safety Warnings
WARNING
This product contains one or more chemicals known to the state of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
Read and understand sprayer manual and chemical warnings before each use. Failure to follow these instructions may result in
personal injury or property damage.
Always mix spray solution following directions on chemical manufacturer instructions. Improper mixing of spray solution may result
in personal injury or property damage.
Wear protective clothing and eye protection.
Check hose, o-rings and fittings are in good condition before each use. Hose, cap and valve must be securely fastened
before pressurizing. Content of tank may leak out and cause personal injury or property damage.
Use only the supplied pump to pressurize the tank. Do not stand over tank while pressurizing or using. Release pressure per
instruction manual. Do not block or alter the valves or pump components. Personal injury or property damage may result.
Do not use flammable, caustic, acidic or corrosive chemicals with sprayer. Personal injury or property damage may result.
Test with water at the beginning of each season. Testing will ensure proper functioning of tank sprayer and pump.
Do not leave tank in direct sunlight or use solutions above 105 °F. The tank may burst or split causing hazards due to increase in
pressure. Damage to pressure seals may result in chemical leakage.
Do not spray people or animals. Injury to bystanders or animals may result.
Never spray on a windy day. Chemical drift could cause personal injury or damage to other plants.
Do not carry sprayer by the hose. Carry only by securely locked pump handle. The hose may detach from the tank sprayer and
allow chemical leakage. Personal injury may result.
Do not store with chemical in tank. Tank, hose and valve must be thoroughly cleaned with soap and water after each use.
Cross-contamination of chemicals may result in personal injury or property damage.
Do not store with the tank pressurized. Personal injury may result if tank unexpectedly pressurizes
RETAIN THIS MANUAL FOR FUTURE USE
PREPARING SPRAYER FOR USE (GP1,GP2,GP3, 1P, 2P)
1. Insert one end of the pickup tube into the hose nut, then insert the
tube into the threaded hole on the side of the tank and turn the
hose nut until tight.
2. Assemble sprayer wand to valve by inserting and holding rod into
open end of valve.
3. Attach extension cap securely by hand.
4. Screw pump assembly into the top of the tank securely by hand.
CAUTION
Never use tools to tighten parts. Threads may
become stripped and tank will not allow pressurization.
All manuals and user guides at all-guides.com
Utility Sprayer -
1P, 2P
AVAILABLE PARTS
GP175
Pump Assembly -
GP70
Hose/Discharge Valve -
R58C
Discharge Valve (trigger) -
R15C
Spray Wand -
R16C
Adjustable Nozzle Tip -
300024A
Brass Fan Spray Nozzle Tip -
R11C
Pickup Tube -
Pump Maintenance Kit -
Turbo Pump -
T1500, T2000, T3000
AVAILABLE PARTS
1P75I
Discharge Valve (trigger) -
GP70
Spray Wand -
R58C
Adjustable Nozzle Tip -
R15C
R16C
R17C
300024A
R11C
PREPARING SPRAYER FOR USE (T1500, T2000, T3000)
1. Attach measuring cup to cap.
2. Screw the connecting nut at end of hose into tank.
3. Bring the pickup tube through the inside of the tank and insert
it into hose.
4. Assemble sprayer wand to valve by inserting and holding rod into
open end of valve.
5. Attach extension cap securely by hand.
6. Screw pump assembly into cap.
CAUTION
Never use tools to tighten parts. Threads may
become stripped and tank will not allow pressurization.
R58C
R15C
R16C
1
Tabla de contenido
loading

Resumen de contenidos para Gilmour GP1

  • Página 4: Utilidad Pulverizador

    All manuals and user guides at all-guides.com INSTRUCCIONES DE SEGURIDAD Y UTILIZACIÓN DEL ROCIADOR DE TANQUE BackSaver - Utilidad Pulverizador - Rociador de Bombeo - GP1, GP2, GP3 1P, 2P T1500, T2000, T3000 PIEZAS DISPONIBLES PIEZAS DISPONIBLES PIEZAS DISPONIBLES Montaje de bomba -...
  • Página 5: Cómo Usar El Rociador

    5. Gire la valvula de seguridad a la izquierda, a la posicion abierta, antes de guardar el tanque. 6. Para GP1, GP2, GP3, 1P & 2P (Este modelo sólo) Vierta unas 10 gotas de aceite de motor de grado 20 o más espeso en la abertura que rodea la varilla de la bomba antes de usar la unidad al comienzo de cada estación y en forma periódica de ahí...
  • Página 6: Solución De Problemas

    Si está dañado, reemplácelo por componentes del juego de repuesto. Engráselo con aceite de motor de grado 20 o más espeso. (see fig.2) (GP1, GP2, GP3 only) e. Inspeccione la empaquetadura del cilindro (C). Si está sucia, limpie todas sus superficies y el borde del tanque con un trapo limpio y sin pelusa.
  • Página 7: Recomendaciones Generales Para Rociar

    NO DEVUELVA EL PRODUCTO A LA TIENDA Le asistiremos gustosamente si tiene preguntas, necesita repuestos o tiene algun problema. Si necesita repuestos o tiene preguntas, llame o escriba a: Robert Bosch Tool Corporation 1 Sprinkler Ln. Peoria, IL 61615 (800) 852-2723 / (800) 458-0107 www.gilmour.com...

Este manual también es adecuado para:

Gp2Gp31p2pT1500T2000 ... Mostrar todo

Tabla de contenido