Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRODUCT ORIENTATION
Adjustable
Thermostat
Switch
OPERATION INSTRUCTIONS
1. Place the product upright on a flat, level, stable, heat-resistant surface, and then plug
the Power Cord into a standard 120-volt electrical outlet.
2. Turn on the product by rotating the Power Setting Switch to the desired setting: " "
(fan only - no heat), "I" (I - 900 Watts), or "II" (II - 1500 Watts).
3. Then turn the Thermostat Switch clockwise to the end of its range. The Power
Indicator will illuminate, indicating the Heater is on.
4. Allow the product to operate until the ambient room temperature reaches the desired
comfort level.
5. Slowly turn the Thermostat Switch counterclockwise until the product turns off. The
product will cycle on and off to maintain the setting.
6. To adjust the thermostat, turn the Thermostat Switch clockwise to increase the
temperature and counter-clockwise to decrease the temperature.
7. Turn off the product by rotating the Power Setting Switch to the "OFF" position, and
then unplug the product from the electrical outlet.
WARNING: Always unplug the product when it will be left unattended or not in use.
8. Press the "Oscillation" switch on top of control panel to turn the oscillation function
on/off.
Oscillation Switch
Main
Control Knob
Metal Grill
Base
OSCILLATION
Figure C
E-5
Tabla de contenido
