Eldom svad GK170 Instrucciones De Uso página 12

USE
Before using the device and plugging it in to the power supply mains with the parameters
compliant with the ones indicated on the device, set the thermostat (3) in the "0" position.
fig.1
CONTACT GRILL
- Set the device on a flat, stable and heat-resistant surface.
Close the cover (1).
-
Install the grease collector (9) in the base (8) - fig. 1.
-
- If the products for grilling contain a large amount of fat you can lift the device by its
moveable feet - fig. 2.
Connect the device to a power supply. A red control lamp (5) will come on.
-
Set the temperature using the thermostat (3). A green control lamp (4) is lit when the
-
device is heating up, and it turns off, when the device reaches the desired temperature.
- Open the cover (1) holding it by the holder (2). Place the products and gently close the
cover (1). Do not push the cover (1) down, as you may crush the products, and do not
block it during operation (6). The cover (1) will automatically adjust to the thickness of
the products.
- The green control lamp turns on and off during frying. The thermostat maintains
a proper temperature.
- Remove the products when they are done frying. In order not to damage the heating
plates, use wooden or plastic, heat-resistant utensils.
During the preparation of new portions of products, close the cover (1) in order to
-
maintain the temperature.
Empty the container (9) regularly.
-
- After the full completion of roasting, disconnect the device from the power supply.
-
HORIZONTAL GRILL
- Set the device on a flat, stable and heat-resistant surface.
- Push the lock button (7) and open the top cover holding it by the holder (2).
12
fig.2