Etherma SOLAMAGIC S1 Instrucciones De Montaje Y De Uso página 131

3. Installation, radiant heater
with ceiling installation frame
(device type IR 05026, IR 05027, IR 05028, DS 05028)
General instructions
• The ceiling installation frame is suitable for installation fastening in ceiling
panels of min. thickness 10 mm and max. thickness 30 mm (Blind frame-
Version max. 25 mm).
• In the case of heaters with light-coloured surface coatings (e.g. white), conti-
nuous operation may result in changes to the surface colour.
• The installation must not change or impair the existing ceiling stand.
• The minimum distances in accordance with Appendix 2 must be observed.
• The ceiling installation space must meet the following minimum dimensions
for the necessary air circulation:
Heater type
IR 05026
IR 05027
IR 05028
DS 05028
The open spaces must not be constricted or covered by insulating material or
otherwise.
• Two people are required for the installation.
• The electrical connection must be made outside the installation frame
(inspection access).
Width in mm
min. 500
min. 600
131 131
Length in mm
min. 900
min. 1200