How To Adjust The Alarm - Rumble Tuff Breeze PA209DA Manual

How to Adjust the Alarm

The Alarm Clock Mode is designed to remind you when it's time for your next
pumping cycle. By keeping a regular expression pattern, your body maintains
a good milk supply. After you set the time interval between each pumping
session, the alarm countdown will automatically start after the previous
pumping cycle has ended. An alarm will sound when the pre-set time has
passed.
1. In Clock/Standby Mode, press the M Button
Adjusting Mode.
2. LCD screen will alternately display two sets of time: Alarm Interval time
(which is the time between each pumping session) and Next Alarm Time.
(The time of your next pumping session). E.g. If the Power Off time of your
last session is 10:58 AM and you want to do the next expression session in
2 hours and 30 minutes, then set the Alarm Interval Time as 2 hours and 30
minutes. The Next Alarm Time will be at 1: 28 PM. (As shown on P. 22)
3. Turn the Vacuum Adjustment Knob
(-) to adjust the Alarm Interval Time. The adjustment increases (+) or
decreases (-) in 15 minute increments. The Next Alarm Time will be
adjusted automatically according to the last time the pump was used.
Note: The Alarm Interval Time is the time from the end of the last session to the next
alarm set off time. It is NOT the time from the beginning of one expression session
to the beginning of the next one.
4. Press the Expression Button
5. Turn the Vacuum Adjustment Knob
(-) to adjust the Alarm Function On/Off.
6. Press the Expression Button
Note: If no adjustments are made within 10 seconds in the Alarm Adjusting Mode, the
setting will automatically save and the LCD Screen will return to Clock/Standby
Mode.
About Your Rumble Tuff Breeze
once to go into the Alarm
clockwise (+) or counterclockwise
to switch to the Alarm On/Off setting.
clockwise (+) or counterclockwise
again to save your setting.
21