Operating Conditions; Cleaning And Maintenance - Saurium F003 Manual Del Usuario

OPERATING CONDITIONS

Keep the charging temperature from 0ª to 45ºC, for charger and battery. And discharge
temperature -1 to 60ºC for battery.
OPERATING INSTRUCTIONS
Wear comfortable clothing and protective gloves when working with this appliance. Before
each use, check that the power supply runs normally. The switch and safety button must
function correctly. When the trigger is released the machine should switch off. If the trigger is
damaged, stop using the tool. Check if the mains voltage corresponds to the machine's
voltage. The risk of injury can be reduced by using protective devices and ensuring that they
function correctly.
• Confirm the operating frequency to ensure optimum operation.
• To preserve the battery and ensure the best usage life for cutting and trimming, avoid
cutting wet branches or dry branches over 60mm in diameter to avoid overloading the
machine.
• To interrupt the trimmer mode, turn off the switch and remove the battery.
FURTHER INSTRUCTIONS
1) When working with the appliance, the other hand should be at least 15cm away from
the cut and blade and avoid going near it.
2) Do not use this appliance on larger branches as it may deform the blade and jam the
chain.
3) In a cold and damp atmosphere, place the battery under waterproof clothing to
protect it. Do not use this equipment in rain.
4) After use, we advise you to remove the battery from the device, lock the switch and
place the device in its case.
5) If the battery is not enough or the cut is not very clean, check that the battery is
charged and the blade is sharp.

CLEANING AND MAINTENANCE

• All repairs not mentioned must be carried out by the Service Centre. To ensure safe
operation, only original spare parts may be used.
• Please disconnect the equipment before repairing the power supply. Remove the
battery from the device and store in a safe place.