Advanced Settings - Genebre GE-SMART Manual Del Usuario

The device will return to the previous mode of operation after
30mins, then
function during the heating off period.
Note: Before adding the thermostat to the app, please make
sure you have add the Wifi Gateway "Ge-Smart"
1. Turn off by pressing ON/OFF button, then long press M
2.
3.
Under off mode, press and hold M button and + button for 6
seconds to enter parameter setting. Each press of M button will
go to next item setting. Adjust the value by pressing
+ or - button.
Manual Termostato (103x75 mm).indd 12 Manual Termostato (103x75 mm).indd 12
disappear. Press any button will exit OWD
(needed Wifi gateway "Ge-Smart")
button to enter code pairing, then press + button once,
the code will start flash.
Turn on app, select gateway you already added - press
add sub device - press heater/thermostat, then press
"Confirm indicator rapidly blink" on phone.
Wait until connection process is finished.
PAIR DEVICE TO WIFI

ADVANCED SETTINGS

7/1/20 9:37 7/1/20 9:37