Speci Cations - Onix PH-15 Guia Del Usuario

Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong
with this component, check the points below. Sometimes the trouble may lie in another component. Investigate
the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest ONIX authorized
service center or your dealer to carry out repair work.
Fault
No power
Poor connection in socket or no utility.
No sound Audio cable not connected.
SENSIBILITY IMPEDANCE
GAIN
SIGNAL/NOISE RATIO
OVERLOAD
THD
Recommended Phono Detector
SENSIBILITY IMPEDANCE
GAIN
SIGNAL/NOISE RATIO
OVERLOAD
THD
Recommended Phono Detector
DIMENSION
WEIGHT
POWER CONSUMPTION
FREQUENCY RESPONSE
POWER SUPPLY
RIAA DEVIATION
OUTPUT VOLTAGE
OUTPUT IMPEDANCE
Every speci cation and design of the product is subject to change without prior notice
For warranty information, please contact your local ONIX distributor. Your purchase receipt is your permanent record
of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when
corresponding with ONIX. When seeking warranty service, it is responsibility of the consumer to establish proof and
date of purchase. Your purchase receipt or invoice is adequate for such proof.
Possible causes

Speci cations

3.5 mV/47KΩ/150pF
40 dB
>95dB (±0,5 mV)
MM 22 dB
<0.01%(20Hz - 20kHz)
MM 2.5 mV - 5 mV di uscita
0.5 mV/100Ω/470pF
60dB
>75dB (±0,5 mV)
MC 20 dB
<0.04%(20Hz - 20kHz)
MC 0.5 mV - 1 mV di uscita
(W x D x H): 215 x 365 x 102 mm
3,3 Kg
<10W
20Hz - 20KHz (-0.5dB)
220V-240V AC
± 0.2%
250 mV
100 Ohm
Warranty
Treatment
Check power source and connect socket tightly.
Connect audio cable properly.
5